Back To Top

Details

Create a fire storm

The GelSoft Storm is a brightly coloured replica of the P226 pistol. It’s a super comfortable pistol to hold and use and offers the ability to fire in both full and semi-auto (by pulling and holding the trigger or pulling and releasing quickly.) This pistol fires safe, frangible GelSoft ammo up to 20m accurately and with a great rate of fire; the ammo is biodegradable and made predominantly from water ensuring no harm to the environment. On impact, the ammo 'pops' or 'bursts' with a satisfying splat of water, or just bounces off the target safely.

The Storm is made from high impact ABS and comes with a fillport/hopper that uses gravity to feed the ammo into the pistol. To load the battery into this gun, simply open the battery compartment under the handle/grip and connect the battery and attached the battery case by clicking into place – now it’s ready-to-use!

What’s in the box

The GelSoft Storm is supplied with ammo, fillport hopper, USB charger cable, battery pack and goggles. The GelSoft Storm is simple to assemble and does not require any tools.

GelSoft Storm What's in the Box
 
GelSoft Storm Parts
 

Specs

Range 20m
Dimensions TBA
Ammo Capacity 50 Rounds
Charging Time 3hrs

Charging Guide

Charging Guide

Charging the battery pack

Charging the battery packs couldn’t be simpler follow these five easy steps to get the best performance from your GelSoft gun.

Step 1

Disconnect the battery from your GelSoft gun.

Step 2

Attach the battery cable to the included USB charger.

Step 3

Connect the charging cable into any USB charging port.

Step 4

Allow approximately 3 hours for a full charge. – The USB connector has a red LED indicator which indicates charge level. The LED will dim or go out when the battery pack has received a full charge.

Step 5

The battery will then be ready for reinstallation and use!

Ammo Preparation

Ammo Preparation

Preparing ammo is really simple

Step 1

Empty sachet of dry GelSoft beads into the included bottle, or alternatively, you can make much larger quantities of ammo by pouring several dry sachets into a larger bowl or bottle.

Step 2

Fill the bottle to the top with water, or, in the case of making a larger batch, ensure all the dry ammo is completely covered by a good centimetre of water.

Step 3

Leave for approximately 3-4 hours to ensure enough water has been absorbed to bring the ammo to full size. We recommend leaving this overnight just to make sure. (Once they’ve finished absorbing water, they cannot get any bigger, so there are no negative side effects of leaving overnight).

Step 4

Once complete, place the now complete ammo onto a piece of kitchen towel or cloth to remove excess moisture and return to a bottle or storage container until needed.

Step 5

The ammo is now ready to be loaded into your GelSoft gun.


Top Tip:
Never run out of ammo by preparing several sachets of ammo before your battle! They keep for a long time if kept in water and topped up occasionally.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register