Back To Top

Details

Let the Eagle fly

GelSoft is all about having fun and the GelSoft Eagle pistol delivers just that allowing you to get in on the action whether your plinking or having a skirmish shoot out. The GelSoft Eagle pistol shoots soft gel ammunition accurately up to 20 meters – the ammo contains mainly water making it fully biodegradable and great for the environment. On impact the ammo bursts or simply bounces off the target.

The GelSoft Eagle has a lightweight polymer body with a hand large grip that's great for single or double-handed use. The mock silencer screws to the front of the barrel and the laser sight/torch is mounted on the lower RIS rail which also provides access to the battery compartment.

The Eagle has a fully automatic firing mode but can also fire a single round with a press and release of the trigger. Ammo is loaded into the mock telescope, fillport hopper, which is situated on the top of the pistol; the ammo loads automatically and fires up to four rounds per second on fully automatic mode.

What’s in the box

The GelSoft Eagle is supplied with 3000 rounds of ammo, a mixing bottle, fillport hopper, torch and laser sight, USB charger and battery pack, silencer. The GelSoft Eagle is simple to assemble and does not require any tools.

GelSoft Eagle Box
 
GelSoft Eagle Green Splat Parts
 

Specs

Range 17-22m
Dimensions 210 x 140 x 40mm
Ammo Capacity 250 Rounds
Charging Time 3hrs

Charging Guide

Charging Guide

Charging the battery pack

Charging the battery packs couldn’t be simpler follow these five easy steps to get the best performance from your GelSoft gun.

Step 1

Disconnect the battery from your GelSoft gun.

Step 2

Attach the battery cable to the included USB charger.

Step 3

Connect the charging cable into any USB charging port.

Step 4

Allow approximately 3 hours for a full charge. – The USB connector has a red LED indicator which indicates charge level. The LED will dim or go out when the battery pack has received a full charge.

Step 5

The battery will then be ready for reinstallation and use!

Ammo Preparation

Ammo Preparation

Preparing ammo is really simple

Step 1

Empty sachet of dry GelSoft beads into the included bottle, or alternatively, you can make much larger quantities of ammo by pouring several dry sachets into a larger bowl or bottle.

Step 2

Fill the bottle to the top with water, or, in the case of making a larger batch, ensure all the dry ammo is completely covered by a good centimetre of water.

Step 3

Leave for approximately 3-4 hours to ensure enough water has been absorbed to bring the ammo to full size. We recommend leaving this overnight just to make sure. (Once they’ve finished absorbing water, they cannot get any bigger, so there are no negative side effects of leaving overnight).

Step 4

Once complete, place the now complete ammo onto a piece of kitchen towel or cloth to remove excess moisture and return to a bottle or storage container until needed.

Step 5

The ammo is now ready to be loaded into your GelSoft gun.


Top Tip:
Never run out of ammo by preparing several sachets of ammo before your battle! They keep for a long time if kept in water and topped up occasionally.

Reviews

Customer Reviews

Good
Quality
Value
Price
Very Good! Review by Good

Write Your Own Review

Only registered users can write reviews. Please, log in or register