Back To Top

Details

Our hardest-hitting rifle!

The GelSoft ATAC Elite Series rifle delivers everything you'd expect; there's plenty of power, 30-meter range and a high level of accuracy all combined in this unique magazine or drum fed GelSoft rifle. This ATAC fires safe, frangible GelSoft ammo, the ammo is biodegradable and made predominantly from water ensuring no harm to the environment. On impact, the ammo 'pops' or 'bursts' with a satisfying splat of water, or just bounces off the target safely.

The ATAC rifle has a host of features including a laser sight, pre-loader, SFL foregrip and fully adjustable rear stock. This rifle also includes a removable magazine, a push on 'flash hider' and a mock scope. The ATAC has a new gearbox design which provides a tremendous firepower advantage over other players. You can add your own accessories and attachments to the ATAC via the four R.I.S. rails.

What’s in the box

The GelSoft ATAC is supplied with 2500 rounds of ammo, fillport magazine, laser sight, foregrip, mock scope, safety glasses and USB charger. The GelSoft ATAC is simple to assemble and does not require any tools.

 
GelSoft ATAC Components
 

Specs

Range 30m
Dimensions 795 x 297 x 120mm
Ammo Capacity 250 Rounds
Charging Time 3 Hours

Ammo Preparation

Ammo Preparation

Preparing ammo is really simple

Step 1

Empty sachet of dry GelSoft beads into the included bottle, or alternatively, you can make much larger quantities of ammo by pouring several dry sachets into a larger bowl or bottle.

Step 2

Fill the bottle to the top with water, or, in the case of making a larger batch, ensure all the dry ammo is completely covered by a good centimetre of water.

Step 3

Leave for approximately 3-4 hours to ensure enough water has been absorbed to bring the ammo to full size. We recommend leaving this overnight just to make sure. (Once they’ve finished absorbing water, they cannot get any bigger, so there are no negative side effects of leaving overnight).

Step 4

Once complete, place the now complete ammo onto a piece of kitchen towel or cloth to remove excess moisture and return to a bottle or storage container until needed.

Step 5

The ammo is now ready to be loaded into your GelSoft gun.


Top Tip:
Never run out of ammo by preparing several sachets of ammo before your battle! They keep for a long time if kept in water and topped up occasionally.

Charging Guide

Charging Guide

Charging the battery pack

Charging the battery packs couldn’t be simpler follow these five easy steps to get the best performance from your GelSoft gun.

Step 1

Disconnect the battery from your GelSoft gun.

Step 2

Attach the battery cable to the included USB charger.

Step 3

Connect the charging cable into any USB charging port.

Step 4

Allow approximately 3 hours for a full charge. – The USB connector has a red LED indicator which indicates charge level. The LED will dim or go out when the battery pack has received a full charge.

Step 5

The battery will then be ready for reinstallation and use!

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register